TECHNICAL SPECIFICATIONS & PRODUCT INFORMATION

Size
:
 1220mm X 2440mm and 1300mm x 2800mm 
Thickness
:
 0.5mm to 1.5mm, other thickness can be provided as required. We are also manufacturing industrial laminates of 2.0mm to 8.0mm
Finishes
:
 Glossy,   Suede, Supermatt,   Matt,   Metalic,   Wood - Touch, Aluminium, Fine Woody, G Wood, Onda, Checks,

Sr No. Properties Specification
    IS 2046 - 1995 NEMALD3-1995
01 Thickness (mm) % +0.10 +0.12
02 Resistance to surface wear (Revolutions) 350 (min) 400 (min)
03 Resistance to immersion in boiling water (%)    
  (A) Mass increase 10% (Max) No effect
  (B) Thickness increase 11% (Max) No effect
04 Resistance to dry heat at 1800c Slight change of gloss/colour visible at certain angles No effect
05 Dimensional stability 0.6 (Max)MD 0.6 (Max)MD
  at deviated temperature (%) 1.0 (Max)CMD 1.0 (Max)CMD
06 Dimensional stability    
  at 200c (%) 0.4 (Max)MD 0.4 (Max)MD
    0.6 (Max)CMD 0.6 (Max)CMD
07 Resistance to impact by small diameter ball (N) > 20 > 20
08 Resistance to cracking Hairlines cracks only visible under 6x magnification No effect
09 Resistance to scratching (N) > 2.0 > 2.0
10 Resistance to staining No visible change No effect
  Group 1 & 2 slight change of gloss/colour No effect
  Group 3 & 4 Only visible at certain viewing angles  
11 Resistance to colour change in xenon arc light Blue wool standard rating 6 Slight effect
12 Resistance to colour change in enclosed carbon arc light Blue wool standard rating 5 Slight effect
13 Resistance to cigarette burns Moderate change of gloss and/or moderate brown satin No effect
14 Resistance to steam Slight change of gloss/colour only visible at certain viewing angles No effect

Usage
 

0.50mm to 1.80mm for Decorative as aspect as furniture item
 
2.00mm and above compact laminates mainly used at Cabinet, partition ELECTRIC Board etc.
 
Atith Fiber has two different sizes in their production :
(1) 1220 x 2440mm &
(2) 1300 x 2800mm
 
1220 x 2440mm can be made in Glossy, Matt & Sude Finish for required thickness.
 
Whereas 1300 x 2800mm can be made in Glossy finished only.
 
 
Properties I. S. Standard Limits Our Product Performance
Nominal thickness 1.5mm +/- 0.20mm 1.5mm +/- 0.10mm
Straightness of edges of rectangular finished panel For panels of length 0.6m and above within +/-0. 06Lmm Within +/- 0.04mm
Squareness of rectangular finished panel 3.0mm (Max) 2.00mm
Resistance to dry heat Test at 1800 C +/- for 20 Mins. Tested at 1800C+/- for 25 Mins.No Surface Deterioration
Dimentional Stability Change shall not be greater than 0.20mm (machine direction)
0.30mm (Cross direction)		 Found to be within 0.15 to 0.20mm (machine direction) 0.25 to 0.30mm (Cross direction)
Resistance to boiling water Time specified 2 hours +/- 5 Min. Increase in 10% thickness & weight Tested for 2 hours +/- 5mins. 4% increase in thickness 4%increase in Weight
Cross Breaking Strength
  1. With decorative face in tension 850kgf / cm 2
  2. With decorative face in compression 1200kgf / cm 2
1000 kgf / cm 2
1400 kgf/cm 2
Impact strength Not less than 0.035 kgf.m. 0.045 kgf .m.
Machining Properties Good Excellent
Resistance to Steam Not Worse than grade 4 No visible change
Resistance to spread of flame 50 Seconds 10 to 30 Seconds
( Requirement of buyers)    
Stain Resistance
  1. Artificial Perspiration
  2. Blood - Human
  3. Citric Acid Solution
  4. Coffee
  5. Cooking Fat
  6. Disinfectant Fluids
  7. Gasoline
  8. Ink
  9. Rectified Spirit
  10. Kerosene
  11. Milk or Lassi (Butter Milk)
  12. Sodium hydroxide solution.
 No Blistering, Discolouration
Resistance to surface wear
  1. 350 revolutions(of standard piece)for print paper
  2. 400 revolutions for plain colours
  1. 400 revolutions observed for print paper
  2. 450 revolutions for plain colours

The above values given are on the basis of the exhaustive tests performed in our laboratory and these are given for our customers guidance. These are not to be taken as certified values.

Our product meets all mandatory requirements as specified in Indian Standard IS : 2046 / 1995.
1.00 mm & Industiral Laminates
1.00 mm & Industiral Laminates
0.8 mm Laminates